Meter Reading

Every customer is responsible to read their own meter each month and report that reading to the Sunko WSC office.  You may write the reading on the payment stub for the monthly water bill, email it, mail it, call it in, or use the submission form below.

STEP 1   Locate your meter box, generally found towards the front of a property, near the street.

STEP 2   Once you open the meter box lid, lift the protective cap on the meter. On the face of the meter, there is a large dial and a display of numbers. For the residential meter, each rotation of the dial measures 10 gallons. Read the number display from left to right. Be sure to include the stationary zero. This is your meter reading. Meters measure water in gallons. Charges for the amount of water consumed are rounded to the nearest hundred gallons used during a billing period. Compare that reading to what your bill states as your current or present reading.

STEP 3   Keep in mind that you might be checking your meter on a date different from the one used for billing. This could result in a difference in the amount you find, compared with the amount on which your bill is based. However, if your reading is considerably higher than what is on your bill, check for a leak or try to determine the source of large water use. If your reading is significantly lower than the reading on your bill, please contact us and let us assist you in determining the problem.

Submit your Meter Reading

Relevant Documents